Grundig DVR GPVR1250 User Manual

Digital TV Recorder  
GPVR1250  
Grundig Helpline: 1800509 394 Australia  
Grundig Helpline: 0800450 259 NewZealand  
 
Introduction  
About This Manual  
This User Guide contains all the information you need to know about how to setup  
and watch free view channels using your set top box.  
What is DVB-T?  
It works like traditional TV, but because the signals are digital you need a set  
top box to convert them. This means more channels can be transmitted with  
extra features such as interactivity and wide screen pictures.  
Accessories In the Box  
Remove your digital set top box carefully from the box and remove the  
packaging from each part.  
You will find the following items:  
Digital set top box with fitted mains plug  
Remote control with 2xAAA batteries (not installed)  
Instruction Manual  
AV cable  
R
F loop through cable  
Look out for this symbol. It indicates useful and important tips.  
Trademark of the DVB Digital Video Broadcasting  
Digital Video  
Broadcasting  
Project(1991 to 1996)  
2
 
Safety Information  
Safety is Important  
To ensure your safety and the safety of others, please ensure  
you read the Safety Instructions before you operate this product.  
Keep this informationin a safeplace for futurereference.  
Please read allthe safety informationbefore use.  
Safety Considerations  
Position the cables so that they cannot be walked on or pinched by items  
placed on or against them.  
Do not usethe set topbox in humidor damp conditions.  
Do not allowthe set topbox to getwet.  
Do not exposethe set topbox to drippingor splashing.  
Do not placewater filled objectssuch as vaseson top ofthe set topbox.  
Do not place naked flame sources, such as candles, on top of the  
set top box.  
Cleaning  
Always unplug theset top boxbefore you cleanit.  
Do not useliquid or aerosolcleaners.  
Clean the settop box witha soft, damp(not wet) cloth.  
Ventilation  
The slots and openings on the set top box are for ventilation.  
Do not cover or block them as it may cause overheating.  
Never let childrenpush anything intothe holes orslots on thecase.  
Servicing  
There are no user serviceableparts in thisset top box.  
When servicing referto qualified servicepersonnel.  
Contact the Bushhelpline on 1800 509 394  
in Australiaor 0800 450 259 in New Zealandif you areever in doubtabout  
the installation, operationor safety ofthis unit.  
Battery Disposal  
Please ensure batteriesare disposed ofsafely.  
Never dispose ofbatteries in thefire or withhousehold waste.  
Check with yourlocal authority fordisposal regulations.  
3
 
Remote Control  
Remote Key Function:  
1) STANDBY Used to switchthe set topbox to onor standby.  
2) AUDIO Used to setthe sound output, the available  
settings are STEREO, LEFT, RIGHT, MONO.  
3) SUBTITLE: Used to switchamong different subtitles  
that are broadcasted.  
1
4) TEXT: Used to openteletext OSD displayif teletext  
available in thebroadcasted stream.  
5) MUTE: Used to turnthe sound onor off.  
2
3
15  
6) EXIT: Used to returnto the previousscreen or menu.  
7) VOL+: Used to movearound the menuscreens or  
changing the volumein non-menu state.  
8) FAVORITE Used to accessyour favourite channels.  
9) FAST FORWARD: Used to adjust the fast forwardspeed  
if in HDDplayback mode.  
4
5
16  
17  
6
10) FASTBACKWARD: Used to adjustthe fast backward  
speed in HDDplayback mode.  
11) BLUEkey / LANGUAGE:Used to implementdifferent  
functions in menusaccording to thehelp information  
or switch amongdifferent audio languages that are  
broadcasted in non-menustate.  
18  
19  
7
8
20  
21  
12) YELLOW key/ GOTO: Used to implementdifferent  
functions in menusaccording to thehelp information  
or select theplayback start timein HDD playbackmode.  
13) RECALL Used to switchbetween the lasttwo viewed  
channels.  
14) EPG: Used to displayinformation about theprogram  
being viewed andwhat's on next.  
22  
9
10  
23  
24  
25  
11  
12  
26  
13  
14  
15) NUMBER KEYS:Used to selectchannel numbers or  
input numbers inmenus.  
16) MENU: Used to openthe main menuwindow or returnto  
the previous screenor menu.  
17) CH+: Used to movearound the menuscreens or  
selecting the channelsin non-menu state.  
18) VOL-: Used to movearound the menuscreens or  
changing the volumein non-menu state.  
19) OK Used to confirma selection withina menu.  
20) CH-: Used to movearound the menuscreens or selecting  
the channels innon-menu state.  
21) RECORD LIST: Used to viewthe recorded programlist.  
22) STOP: Used to stop the current recordingor stop theHDD playback backto DTV mode.  
23) PLAY/PAUSE: Used to resumethe playback ifstopped or intime shifting mode(FF,FB, PAUSEetc)  
or pause the the current pictureor do time-shifting.  
24) RECORD: Used to implementdifferent functions inmenus according tothe help information,  
or record thecurrent viewed channeldirectly, orselect the recordduration if pressedagain in  
non-menu state.  
25) PVR INFO:Used to implementdifferent functions inmenus according tothe help informationor  
display the timeinformation and progressbar and playstate in HDDplayback mode.  
26) INFO: Used to displayinformation about thechannel being viewedor further information  
about the program when in smallEPG screen.  
Note: SUBTITLE/TEXT/LANGUAGE maynot available forall channels.  
4
 
Installing the Batteries  
Remove the battery cover from the remote control and put place 2 x AAA size  
batteries inside the compartment. Make sure to match the + and - of the batteries with the  
marks inside the battery compartment  
1.Open the cover  
2.Install batteries  
3.Close the cover  
Using the Remote Control  
To use the remote control, point it towards the front of the digital set top box.  
The remote control has a range of up to 7 metres from the set top box at an  
angle of up to 60 degrees.  
The remote control will not operate if its path is blocked.  
Sunlight or very bright light will decrease the sensitivity of the  
remote control.  
5
 
Front Panel and Rear Panel Illustration  
1. Front panel  
1
2
3
4
5
6
7
8
9
1) POWER BUTTON: Used to switchthe main powerof the settop box toon and off.  
2) REMOTE CONTROLSENSOR: Used to receivethe signal fromthe remote control.  
3) LED DISPLAY: Used to displaythe channel numberand time informationand other playstates.  
4) VOLUME DOWN: Used to decreasethe volume withoutusing the remotecontrol.  
5) RECORD: Used to recordthe program manually, and selectthe record durationif pressed itagain.  
The user canchange the watchingchannel if recordingthe specific program  
6) CHANNEL UP:Used to changechannels without usingthe remote control.  
7) VOLUME UP: Used to increasethe volume withoutusing the remotecontrol.  
8) CHANNEL DOWN: Used to changechannels without usingthe remote control.  
9) STANDBYINDICATOR: Used to visuallyshow power stateof the settop box,  
the red LEDwill be lit if the settop box enteredstandby mode.  
2. Rear panel  
100-240V~  
50/60Hz  
Cb  
Cr  
Y
VIDEO  
L
R
F
LOOP  
R
F
LOOP  
R
F
IN  
R
F
IN  
THROUGH  
THROUGH  
COAXIAL  
S-VIDEO  
R
RS-232  
VIDEO  
COMPONENT OUT  
DIGITAL  
TV TUNER  
PVR TUNER  
AUDIO/VIDEO OUT  
AUDIO OUT  
1
2
3
4
5
6
7
8
1) RF IN/ RF LOOPTHROUGH (PVR andTV tuner)  
PVR/TV RF INsocket connects toyour external aerial. PVR/TV RF LOOPTHROUGH socket  
will bypass theinput RF signalto another tuneror your TVor another videosystem.  
See connection pagesfor details  
2) VIDEO COMPONENT (Y,Cb,Cr): These sockets outputcomponent video signal.  
3) COAXIAL: This socket connectsto a coaxialsocket on yoursurround sound systemto output  
digital audio.  
4) VIDEO: This socket outputscomposite video signal.  
5) S-Video: This socket outputsseparate Y/C videosignal.  
6) AUDIO L/R: This socket outputsanalog audio L/Rsignal.  
7) RS-232 PORT: This socket isonly used forsoftware upgrade.  
8) MAIN POWERCABLE:This is usedto connect toyour main powersupply.  
6
 
Connecting to Television Aerial and RF cable  
There are 2kinds of connectionsfor the TV aerial andRF cable presentedbelow:  
1.  
TV Aerial  
100-240V~  
50/60Hz  
Cb  
Cr  
Y
VIDEO  
L
R
F
LOOP  
R
F
LOOP  
R
F
IN  
R
F
IN  
THROUGH  
THROUGH  
COAXIAL  
S-VIDEO  
R
RS-232  
VIDEO  
COMPONENT OUT  
DIGITAL  
TV TUNER  
PVR TUNER  
AUDIO/VIDEO OUT  
AUDIO OUT  
2.  
TV Aerial  
100-240V~  
50/60Hz  
Cb  
Cr  
Y
VIDEO  
L
R
F
LOOP  
R
F
LOOP  
R
F
IN  
R
F
IN  
THROUGH  
THROUGH  
COAXIAL  
S-VIDEO  
R
RS-232  
VIDEO  
COMPONENT OUT  
DIGITAL  
TV TUNER  
PVR TUNER  
AUDIO/VIDEO OUT  
AUDIO OUT  
7
 
Connecting to a Television  
100-240V~  
50/60Hz  
Cb  
Cr  
Y
VIDEO  
L
COAXIAL  
S-VIDEO  
R
RS-232  
VIDEO  
COMPONENT OUT  
DIGITAL  
AUDIO/VIDEO OUT  
AUDIO OUT  
Component video  
Cr  
Cb  
Y
8
 
Connecting to a Surround Sound System  
100-240V~  
50/60Hz  
Cb  
Cr  
Y
VIDEO  
L
COAXIAL  
S-VIDEO  
R
RS-232  
VIDEO  
COMPONENT OUT  
DIGITAL  
AUDIO/VIDEO OUT  
AUDIO OUT  
AUDIO IN  
Coaxial  
Digital Amplifier  
VOLUME  
INPUT SELECTOR  
POWER  
BYPASS  
PRO LOGIC  
3
STEREO  
MODE  
TEST  
CHANNEL  
KARAOKE  
MUTE  
DOWN  
UP  
BASS  
MIC  
TREBLE  
ECHO  
1
MIC  
2
1
MIC VOL  
2
EXCITE  
9
 
Getting Started  
Switching On forthe First Time  
Ensure all connections have been made following the diagrams on the previous  
pages for reference.  
To switch on the set top box, press the  
button on the set top box.  
(To turn the set top box to standby mode, press  
button on the remote control).  
Switch on the TV and select the AV programme channel(EXT,AV, External Source  
or similar). Your set top box will automatically scan.  
Scan finished will display for a moment on TV after all stations are found and  
automatically stored. If you want to scan again, follow the procedure below:  
Press MENU button on the remote control, the set top box main menu will display.  
System Setting  
Exit  
OK  
Confirm  
1. Channel setting  
Select the Channel Setting menu by using the arrow buttons on the  
remote control.  
OK  
Press the  
button when the Channel Setting menu is highlighted.  
OK  
Press  
button again when Channel Search is highlighted.  
Channel Search  
C
Search Type  
Channel No:  
Bandwidth  
Manual Scan  
S
8M  
Encrypted Service  
Not Save  
Append  
Start Search  
Update Mode  
Quality:  
50%  
50%  
Strength:  
Confirm  
Exit  
OK  
10  
 
Select the Auto Scan tab by using the arrow and the  
buttons  
OK  
on the remote control.  
OK  
Press the  
button when the Start Search tab is highlighted.  
The following menu will display.  
Scan Process  
Channel No:  
21 Frequency: 474MHz  
Scan Process:  
0%  
TV  
0
Radio  
0
No Items  
No Items  
Exit  
The set top box will scan for all the available digital TV and radio  
stations available in your area.  
There is also a progress bar shown as a percentage.  
Do not turn off the set top box until the digital TV and radio stations  
have been stored. Otherwise you will need to scan them again.  
You are now ready to start viewing and listening to your digital tv and  
radio channels.  
LCN On/Off  
LCN(Logical Channel Number):A number that uniquelyidentifies a logicalchannel.  
Select the LCN option in the Channel Setting menu using the arrow buttons.  
OK  
Press the  
button when selected. The following menu will be displayed.  
Logical Channel Number  
Channel Search  
LCN  
OFF  
ON  
OK  
Exit  
Confirm  
The LCN On/Off option allows you to select how your channel number will be  
displayed in the channel list or selected when pressed the digits key.  
11  
 
2. System Setting  
From here you can set the Time, Sleep timer, Language, Parental  
settings, A/V settings, PVR setting or revert to the factory settings.  
Time Setting  
Press the MENU button and select System Setting option using thearrow  
buttons.  
OK  
Press the  
buttonwhen selected. The following menuwill display.  
System Setting  
Time Setting  
Language Settings  
Parental Setting  
A/V Setting  
PVR Setting  
Factory Setting  
System Info  
Exit  
OK  
Confirm  
12  
 
Time Zone Setting  
OK  
Select Time Zone Setting option using the arrow button. Press the  
button when selected. The following menu will display.  
TimeZone Setting  
Time Setng  
Time Setting  
Lan
T
im
e
Z
o
n
e
GMT+0  
GMT+0  
GMT+1  
GMT+2  
GMT+3  
GMT+4  
Sl
Par
A/V Setting  
PVR Setting  
Factory Setting  
System Info  
Exit  
OK  
Confirm  
Press the  
Press the  
or  
buttons until thecorrect time zoneis displayed.  
OK  
buttonto confirm yourselection.  
The time zone can, t be changed if the broadcast stream have time zone  
information. That means the user setting will only take effect if there is  
no time zone information in the stream.  
Sleep Timer Setting  
Open the Time Setting menu as previously explained. Highlight the  
Sleep Timer setting option using the arrow buttons.  
OK  
Press the  
and  
button and the menu below will be displayed.  
SleepTimer Setting  
Time Setting  
Time Setting  
Lan
S
l
ee  
p
A
ft  
er No Sleep  
No Sleep  
Mins  
Sl
Par
5
10 Mins  
20 Mins  
30 Mins  
A/V Setting  
PVR Setting  
Factory Setting  
System Info  
Exit  
OK  
Confirm  
Press the  
Press the  
or  
button to select the sleep time.  
OK  
button to confirm your selection.  
13  
 
2
Language Setting  
Select the Language Setting option using the arrow buttons.  
OK  
Press the  
button when selected. The following menu will display.  
Language Settings  
Time Setting  
English  
Menu  
Lan
Audio  
English  
English  
Par
A/V Setting  
PVR Setting  
Factory Setting  
System Info  
OK  
Exit  
Confirm  
3
Parental Setting  
OK  
Select the Parental Setting option using the arrow buttons. Press  
button  
when selected.  
Enter Pin Code  
Time Setting  
Language Settings  
Parental
Pin Code  
A/V Settin
PVR Setting  
Factory Setting  
System Info  
OK  
Exit  
Confirm  
OK  
Enter the right Pin Code then press the  
button. If the Pin code is  
entered incorrectly, Pin Code Error will be displayed.  
Use the  
or  
buttons to select the required option, then press  
OK  
the  
button to confirm.  
14  
 
Change Pin Code  
The Change Pin Code menu allows you to change the password,  
which currently defaults as 6666 .  
Enter you new PIN code using the numerical buttons on the remote  
control.  
Press the  
Press the  
button and enter the new PIN code again.  
button to confirm the new PIN code.  
OK  
Please note that your new PIN code must contain 4 digits.  
4
A/V Setting  
OK  
Select the A/V Setting option using the arrow buttons. Press the  
button when selected. The following menu will display.  
A/V Setting  
Time Setting  
TV Shape  
Langu
4:3  
4:3  
Letter Box  
AUTO  
RGB  
16:9  
Conversion  
Paren
TV Standard  
A/V S
Video Output  
PVR S
50%  
Bright&Contrast  
Facto
50%  
Saturation  
Syste
OK  
Exit  
Confirm  
To change the settings, first use the  
or  
buttons to select the  
required menu, then use the  
or  
buttons to select the new option  
required.  
TV Shape  
You can select either 4:3 or 16:9 format. 4:3 should be used for standard  
square shaped television screens, and 16:9 should be used for wide screen  
rectangular shaped television screens.  
Conversion  
You can select Full Frame, Pan Scan or Letterbox. Choose the  
setting which best matches your television.  
Standard  
The standard setting is used to set the signal input to your TV. There are two  
different standards available on your set top box, PAL and NTSC.  
If you are In Australia PAL is the standard format.  
15  
 
If NTSC is chosen for your televisions you may experience  
interference and picture rolling.  
Video Output  
The Video Output setting is used to set the colour signal to your TV. There are  
3 different settings available on your set top box: S-Video, CVBS, YCbCr.  
,
If you are unsure which setting to use consult the manufacturer s manual for  
your television.  
If S-Video/YCbCr is chosen for a non compatible television,  
you will typically experience a washed out or a ghosted effect picture.  
Brightness and Contrast/Saturation  
You can use  
and  
buttons to adjust the brightness and  
contrast or saturation of the video output.  
5
PVR Setting  
OK  
Select the PVR setting option using the arrow buttons. Press the  
button when selected. The following menu will display.  
PVR Setting  
Time Setting  
Language Settings  
Parental Setting  
A/V Setti
Time Shift Enabled  
Time Shift Disabled  
Time Shift Enabled  
PVR Set
Format Hard Disk  
Factory
HDD Information  
System Info  
OK  
Confirm  
Exit  
Time Shift Enabled/Disabled  
This enables ordisables the timeshift function. The duration is upto 1 hour.  
Format Hard Disk  
Formatting is necessary when using the hard disk for the first time.  
The system will auto reset after the successful formatting  
HDD Information  
It will showthe HDD capacity.  
16  
 
6
Factory Setting  
Select the Factory Setting option using the arrow buttons. Press  
the  
button when selected. The following menu will display.  
OK  
Factory Setting  
Time Setting  
Language Settings  
Parental Setting  
A/V Setting  
PVR Setting  
Restore Default  
Factory Setting  
Clear Channels  
System Info  
OK  
Exit  
Confirm  
Restore Default  
The Restore Default menu allows you to reset the menu settings.  
Clear Channels  
The Clear Channels menu removes all channels from the Channel list.  
To restore the channel list, you will need to rescan.  
System Info  
7
The System Info menu displays the software version and hardware version.  
System Info  
Time Setting  
Language Settings  
Parental Setting  
A/V Setting  
PVR Setting  
Factory Setting  
System Info  
Software Version  
Hardware Version  
OK  
Exit  
Confirm  
17  
 
3. Channel List  
The channel listis used tolook at allthe broadcasting TV or Radiochannels  
received by theset top box.  
To access the channellist press the  
OK  
button in thenon-menu state.  
Toedit the channellist, press theMENU button and selectChannel List using  
the arrow keys, press the buttonwhen it's highlighted.  
OK  
Channel List  
TV  
No Items  
BandWidth  
Frequency  
Quality:  
50%  
50%  
Strength:  
OK  
Exit  
Popup Menu  
Confirm  
TV/Radio  
To view a different channel, presseither the  
or  
button,  
each channel selectedwill be previewedin the upperright hand box.  
To switch between TV and Radiochannels, press theRED button.  
OK  
To view/listen to achannel, press the  
button.  
To Lock&Unlock/Delete/Move a channel, press the  
To lock a channeland prevent peoplefrom watching it, highlight the  
button.  
channel that youwant to lockby using either  
or  
button,  
OK  
press the  
button, press the  
buttonwhen highlight Lock&Unlock  
in the popup menu. Enterthe right PINcode in thefollowing PIN codeform,  
the channel willbe locked, alock icon willbe displayed atthe back ofthe  
channel name aftera successful lockoperation. If thePIN code is  
entered incorrectly, the PinCode Error messagewill be displayedwhich  
indicate the operationfailed. Unlock operationswork similar tothe  
above lock operations.  
18  
 
4. Favourite List  
The favourite list is used to store your frequently watched channels without  
having to search them in the Channel List or EPG menus.  
To edit the favourite list, press the MENU button and select Favourite List using  
OK  
the arrow keys, press the  
button when it's highlighted.  
Favorites List  
Favorite Group: News  
No Items  
FAV  
Right-Popup Menu  
Favorite Switch  
Adding a Favourite Channel  
First use the RED button to select a favourite group, the choices are News, Movie,  
OK  
MTV, Finance, Other. Then press the  
button and  
button to enter the  
pop up Add menu, select the channel you want to add to the specific favourite  
OK  
group then press the  
button, the added channel will be displayed in the left  
hand column. Repeat the same procedure until all your desired channels have  
been added to the specific favourite group.  
Deleting a Favourite Channel  
First use the RED button to select a favourite group. Select the channel that you  
want to delete in the favourite list menu using the  
or  
button,  
press the  
and  
button to enter the pop up Delete menu, then press  
OK  
OK  
the  
button to enter delete confirmation menu, press the  
button to  
delete the selected channel from the favourite list and press the EXITbutton to  
cancel the delete.  
Viewing a Favourite Channel  
To access the favourite list quickly without edit, press the FAVOURITE button directly  
in non-menu state or other menus.  
To change the favourite group, press the RED button.  
Select the desired favourite channel using the  
or  
button,  
OK  
press the  
button to confirm when highlighted, now you can watch the  
selected channel.  
19  
 
5. Booking List  
The booking listis used todisplay all thebooking events youhave in theEPG  
menu or youhave added manually. The booking list menuis displayed below:  
Booking List  
ID  
No Items  
15  
Start Time  
2005.12.28 23:59  
Duration(Mins)  
120  
Type  
Playback  
OK  
Exit  
Confirm  
It will displaythe event ID, start time, duration, purpose(playback or record)  
for each event.  
OK  
Toadd a bookingevent manually, press the  
the event listmenu will display:  
button in bookinglist menu,  
Event List  
1
Event ID  
OK  
Service  
Type  
ONCE  
59  
HH:MM  
):  
24:59  
Start Time  
Start date  
Duration  
Purpose  
Booking  
12/22/2004  
DD/MM/YYYY  
Minutes  
Playback  
OFF  
OK  
Book  
Exit  
The user canchange the eventID using the  
button to starta new booking  
OK  
event, press the  
button to selectthe booking channel, the booking typecan  
be ONCE, DAILY, WEEKLY. The start time andstart date andduration should be  
valid, the bookingpurpose can beRecord or Playback, after all theabove  
selection is ok, switch the bookingto on, thebooking will takeeffect if no  
invalid selection, otherwisethe related errormessage will display.  
20  
 
6. EPG Menu(Electronic Programme Guide)  
The EPG menu is used to look at what is being broadcast on a TV or  
Radio channel later in the day.  
To access the EPG menu, press the MENU button and select the EPG  
menu using the arrow keys. When it is highlighted press the  
to access.  
button  
OK  
The following menu will display:  
Channel Schedule  
Program Information  
SERVICE NAME  
9:00  
9:30  
10:00  
10:30  
OK  
Booking  
Exit  
Channel  
Program Event  
A preview of your current channel will be displayed in the upper left hand box.  
The detailed program information of your current viewed channel will be  
displayed in the upper right hand box.  
To see what is going to be broadcast after this programme, press  
the  
button to change the time. Each press of the  
button will  
increase by half an hour. Pressing the  
an hour.  
will move the time back half  
Toview a different channel press either the  
button or  
button.  
Each channel selected will be previewed in the upper left hand box.  
To book a desired channel for later watching or recording, press the  
OK  
button.  
To exit the EPG menu and watch the selected channel, press the MENU  
or EXIT button.  
21  
 
Record Operations  
Before using the record operations, please check the two tuner(TV/PVR tuner)  
connections in connection pages.  
Watch One Channel While RecordingAnother  
The recording will receive the digital TV signal from the PVR tuner and the watching  
will receive the digital TV signal from TV tuner, this makes it possible to watch one  
channel while recording another channel.  
There are 3 kinds of methods to start arecording:  
1).Press the RECORD key while watching the live TV, the recording of the current  
channel will start in several seconds, you can press the RECORD key again while  
recording started to set the duration of the recording, the default duration is 2 hours.  
2).Schedule Recording in full EPG menu, press the OK button to booking a recording  
once you selected a valid column.  
3).Schedule Recording in Booking List menu, press the OK button to start a new  
booking event. Please prefer to former Booking List page for detail.  
Once recording takes effect, the user can change the current viewed channel as  
they want while the system is still recording at the background.  
Time-Shifting Function  
Have you been interrupted with a phone call or the doorbell while watching live TV  
programs, inevitably missing out on a crucial scene? Pause and replay live TV shows  
by simply pressing the Pause button and then Play button to pick up right where you  
left off. Just like the live TV mode, This PVR recorder provides a slew of file playback  
functions such as pause, instant replay, time-shifting with the scroll bar, fast-forward,  
rewind and so on.  
Changing the viewedchannel while recording  
Press the CH+/- keys to change the watching channel while the PVR is doing  
background recording.  
The user can only record theprograms they wantfrom the PVRTUNER.  
The RECORD button.  
Pressing the RECORD button, the record will start, you can press  
to change your watching channel while recording the specific program.  
The STOP button  
and  
Press the STOP button will stop the current recording.  
The PVR INFO button  
Press this button and time information and progress bar will be displayed when  
recording or playback of the program.  
The REC List button  
Press this button and the recorded program list will be displayed. You can Play/  
Continue/Rename/Delete/Lock&Unlock the recorded program.  
The  
button , SLOW and PAUSE button.  
If the Time Shift function is enabled in System Setting/PVR Setting, you can use  
these buttons to do time shifting feature.  
22  
 
Help and Advice  
Problem  
Probable cause  
What to do  
Mains lead unplugged  
Mains fuse blown  
Check mains lead  
Check fuse  
Standby light not lit  
Aerial is disconnected  
Aerial is damaged/misaligned  
Out of digital signalarea  
Check aerial lead  
Check aerial  
Check with dealer  
No signal found  
No picture or sound  
AV connecterror  
Check AVcable  
Encrypted channel message It is a payper view channel  
Set top box isswitched off  
Select an alternative channel  
Plug in and turnon set top box  
Aim remote control atfront panel  
Check for obstructions  
Check batteries are insertedcorrectly  
Replace remote control batteries  
Remote control is notaimed correctly  
No response from remote  
control  
Front panel obstructed  
Remote control batteries insertedincorrectly  
Remote control batteries exhausted  
Square blocks in pictureor  
picture freezes  
Aerial may not becompatable  
Aerial is damaged/misaligned  
Check with dealer  
Check aerial  
If none of the above suggestions seem to work, try switching your set top box off and  
then on again. If this does not work, contact the service helpline.  
23  
 
Technical Specifications  
Power Supply  
Input Voltage  
100-240V~ 50/60Hz.  
Power Consumption  
Maximum 15W, Standby 5W.  
Decoder  
Video Formats  
Audio Format  
Video Outputs  
SD, 4:3/16:9 Switchable.  
MPEG Layer l & ll,32/44.1/48Khz.  
CVBS, S-Video, YCbCr  
Connections  
Fixed Type  
Main Power Cable  
Tuner  
2 Antenna Input/ 2 Therefore Output  
1 for software upgrade  
1 CVBS output  
RS-232  
RCA  
1 R/L output  
1 COAXIAL SPDIF digital audio output  
1 YCbCr output  
1 S-VIDEO output  
S-VIDEO  
24  
 
Guarantee  
Please keep your receipt as proof of purchase. Thisproduct is warranted for any defect  
in materials or workmanship for one year after theoriginal date of purchase. This productis  
for normal domestic and office useonly. This warranty does not cover damage from misuse  
or neglect, accidental damage, vermin infestation, excessive voltages such as lightning or  
power surges or any alteration that affects the performanceor reliability of the product.  
If guarantee is required please contact the Grundig Helpline 1800 509 394 (within Australia)  
or 0800 450 259 (within New Zealand). Have your receipt of purchase on hand  
This guarantee issubject to thefollowing provisions:  
l
l
It is onlyvalid within theboundaries of thecountry of purchase.  
The product mustbe correctly assembledand operated inaccordance with the  
instructions contained inthis manual.  
l
l
The product must be used solely for domestic purposes.  
The guarantee doesnot cover accidentaldamage, misuse, cabinetparts or consumable  
items.  
l
l
The guarantee willrendered invalid ifthe product isresold or hasbeen damaged  
by inexpert repair.  
The manufacturer disclaims any liability for incidental or consequential damages.  
This guarantee isin addition to, and does notdiminish, your statutoryor legal rights.  
PO BOX 6287  
Silverwater NSW 1811  
Grundig Helpline: 1800509 394 Australia  
Grundig Helpline: 0800450 259 NewZealand  
25  
 

Harbor Freight Tools Welder 93793 User Manual
Havis Shields Automobile Accessories P MFK 5 User Manual
Honeywell Burner Y343B1002 User Manual
Hotpoint Electric Pressure Cooker 6 DOG User Manual
Hotpoint Washer WML 940 User Manual
HP Hewlett Packard Personal Computer 799UT#ABA User Manual
Husqvarna Blower 125B 125BX Series 125BVX Series User Manual
Hyundai Flat Panel Television Q421H User Manual
IBM Printer EasyCoder 3400e User Manual
IKEA Microwave Oven IMH15 User Manual