Grundig CRT Television LWX 82 8510 TOP User Manual

COLOR  
TELEVISION  
VISION 26  
LXW 68-8510 TOP  
VISION 32  
LXW 82-8510 TOP  
DEUTSCH  
ENGLISH  
FRANÇAIS  
ITALIANO  
NEDERLANDS  
TÜRKÇE  
POLSKI  
 
___________________________  
SET-UP AND SAFETY  
10  
cm  
10  
cm  
Please note the following information when setting up your television set.  
20  
cm  
20 cm  
This television set is designed to receive and display video and audio  
signals.  
Any other use is expressly prohibited.  
The ideal viewing distance is 5 times the screen diagonal.  
External light falling on the screen impairs picture quality.  
Ensure sufficient clearance between the TV and the wall cabinet.  
The television set is designed for use in dry rooms. If you do use it in the  
open, please ensure that it is protected from moisture, such as rain or  
splashing water. Do not expose the television set to any moisture.  
Do not place any vessels such as vases on the television, as they may  
spill liquid, thus presenting a safety risk.  
olf  
G
m
a
g
Place the television set on a solid, level surface. Do not place any  
objects such as newspapers on the television set or cloth or similar items  
beneath it.  
Do not place the television set close to heating units or in direct sunlight,  
as this will impair cooling.  
Heat build-up can be dangerous and shortens the operating life of the  
television set. For reasons of safety, have a specialist remove any dirt  
deposits in the set from time to time.  
AV  
AV  
AV  
3
2
1
VICE !  
Do not open the television set under any circumstances. Warranty  
claims are excluded for damage resulting from improper handling.  
VIDEO  
L
R
VIDEO  
L
R
PC-DVI  
PC-IN  
AUDIO IN  
A
N
T
I
N
S-VHS  
DVI-D  
A
V
-
4
AV  
OUT  
! SER  
A
C
I
N
Ensure that the mains cable and the mains adapter are not damaged.  
The television set may only be operated with the mains cable/adapter  
supplied.  
TV  
R
AV  
AV  
AV  
3
2
1
Thunderstorms are a danger to all electrical devices. Even if the tele-  
vision set is switched off, it can be damaged by a lightning strike to the  
mains or the antenna cable. Always disconnect the mains and antenna  
plugs during a storm.  
VIDEO  
L
R
VIDEO  
AV  
L
OUT  
R
PC-DVI  
AUDIO IN  
A
N
T
I
N
S-VHS  
PC-IN  
DVI-D  
A
V
-
4
A
C
I
N
Clean the screen with a soft, damp cloth. Only use plain water.  
3
 
__________  
CONNECTION/PREPARATION  
Connecting the antenna and the mains cable  
AV  
AV  
AV  
3
2
1
TV  
R
VIDEO  
L
R
VIDEO  
L
R
PC-DVI  
AUDIO IN  
A
S-VHS  
PC-IN  
DVI-D  
AV - 4  
AV OUT  
1
2
3
1
Plug the antenna cable of the rooftop antenna into the »ANT IN« anten-  
na socket on the television.  
2
3
Plug the mains cable supplied into the mains socket of the television.  
Plug the mains cable into the wall socket.  
Inserting batteries in the remote control  
1
Open the battery compartment by removing the lid.  
2
Insert the batteries (Mignon type, for example UM-3 or  
AA, 2x1,5V). Observe the polarity (marked on the base  
of the battery compartment).  
3
Close the battery compartment.  
Note:  
If the television no longer reacts properly to remote  
control commands, the batteries may be flat. Be sure to  
remove used batteries.  
The manufacturer accepts no liability for damage re-  
sulting from used batteries.  
Environmental note  
Batteries, including those which contain no heavy metal,  
may not be disposed of with household waste. Please  
dispose of used batteries in an environmentally sound  
manner. Find out about the legal regulations which apply  
in your area.  
4
 
____________________________________________  
OVERVIEW  
Connections on the television  
AV 3  
AV 2  
AV 1  
AV 3  
AV 2  
AV 1  
DVI-D  
VIDEO  
L
R
VIDEO  
L
R
PC-DVI  
AUDIO IN  
ANT IN  
S-VHS  
PC-IN  
DVI-D  
AV - 4  
AV OUT  
ANT IN  
AC IN  
AC IN  
AV 4 VIDEO L R  
y
PC-IN  
AV OUT VIDEO L R  
PC-DVI AUDIO IN  
S-VHS  
AV 3  
Euro/AV socket (FBAS).  
Euro/AV socket (FBAS).  
Euro/AV socket (FBAS, RGB).  
Antenna socket.  
AV 2  
AV 1  
ANT IN  
AV 4 VIDEO L R  
Sound/picture input.  
AV OUT VIDEO L R Sound/picture output.  
S-VHS  
S-VHS picture signal input.  
Sound signal input for PC.  
PC-DVI AUDIO IN  
PC-IN  
VGA connection for PC; make the YUV connection  
with the adapter cable supplied.  
DVI-D  
AC IN  
y
DVI-D connection for PC.  
Socket for the mains cable.  
Headphone jack (3.5 mm ø jack plug).  
High definition – HD ready  
Your television can receive high-definition television signals (HDTV).  
You can connect the input sources (HDTV set-top box or HDTV DVD  
player) to either the »DVI-D« socket (digital HDTV signal) or the  
»
PC-IN« socket (analogue HDTV signal).  
This ensures that you can view digital HDTV programmes, even if they  
are copy-protected (HDCP High-Definition Copy Protection).  
5
 
____________________________________________  
OVERVIEW  
The remote control  
Ǽ
Switches off the television set (standby).  
PIP  
Shows an inset picture;  
PIP  
activates the double window function (two different  
TV programmes on separate halves of the screen);  
switches back to normal size.  
Switches between picture formats;  
page stop in teletext mode.  
E
z
-/--  
Shows information on channel position;  
switches to double character size in teletext mode.  
1…0  
Switch the television on from standby mode;  
select channels directly.  
TXT  
AV  
POS  
d
SCAN  
PAP  
SIZE  
d
Sound on/off (mute).  
i
Opens and closes the »MAIN MENU«;  
closes all menus.  
VCR  
DVD  
SAT  
Z
Zap function.  
P+, P-  
Switches the television on from standby;  
selects stations step by step;  
Tele Pilot 160 C  
moves the cursor in the menus up and down.  
Ǹ Ƿ  
OK  
Adjust the volume;  
move the cursor left/right.  
Calls up the preset list;  
activates various functions.  
TXT  
AV  
Switches from TV mode to teletext mode and back to  
TV mode.  
Opens the pre-selection for AV channels.  
Then selection with P+ or P-.  
SCAN  
PAP  
Reveals answers in teletext mode.  
Activates the double window function (TV image and  
teletext on separate halves of the screen).  
SIZE  
POS  
Changes the size of the inset picture;  
selects sub-pages in teletext mode.  
Changes the position of the inset picture;  
updates a page in teletext mode.  
6
 
____________________________________________  
OVERVIEW  
z
Selects various picture settings;  
moves back a page in teletext mode.  
Ȅ
Ƿ
F
Time on;  
PIP  
moves to the next page in teletext mode.  
Freeze-frame;  
selects the chapter in teletext mode.  
Selects various sound settings;  
selects a topic in teletext mode.  
z
VCR, SAT Switches to operating a GRUNDIG video recorder,  
DVD  
a GRUNDIG satellite receiver or a GRUNDIG DVD  
player.  
TXT  
AV  
POS  
d
Keep the appropriate button (»VCR«, »SAT«,  
»DVD«) pressed down. Then press the appropriate  
button.  
SCAN  
PAP  
SIZE  
Note:  
VCR  
DVD  
SAT  
The functions available depend on the model of the  
device you are using.  
Just try it out.  
Tele Pilot 160 C  
Controls on the television  
+ P –  
Switches the television on from standby;  
channel selection.  
TV/AV  
Selects the AV channels and the most  
recently viewed television channel.  
MENU  
+ z –  
IO  
Opens the »MAIN MENU«.  
Adjusts the volume.  
Switches the television into and out of  
standby mode.  
7
 
______________________________________________  
SETTINGS  
Setting television channels automatically  
The television set is equipped with an automatic channel search  
system.  
You start the search and can then sort the television channels into  
your order of preference.  
99 preset positions are provided, to which you can assign television  
channels from the antenna or from the cable connection.  
Sprache  
Deutsch  
Dansk  
Português  
Svenska  
Suomi  
Türkçe  
Eλληvικά  
Hrvatski  
Pyccꢀꢁꢂ  
Español  
Français  
English  
Italiano  
Norsk  
âesky  
Sloven‰cina Româna  
Slovensko  
Magyar  
Polski  
Cꢃꢄꢅꢀꢁ  
ꢆꢇꢈꢉapꢅꢀꢁ  
Dutch  
1
Switch on the television with »IO« on the television set, then  
press »P+« on the remote control.  
Auswählen  
und bestätigen  
Zurück  
Ende  
OK  
G
– The »Sprache« (Menu language) menu appears when the  
television is first switched on.  
Hint:  
If the »Sprache« (Menu language) menu does not appear on  
the screen, then set it in accordance with the chapter on reset-  
ting all television channels on page 27.  
Country  
2
3
Select language with »P+«, »P-«, » « or » « and press  
»OK« to confirm.  
– The »Country« menu appears.  
Germany  
Austria  
Greece  
Hungary  
Iceland  
Ireland  
Italy  
Romania  
Slovakia  
Slovenia  
Spain  
Ǹ
Ƿ
Belgium  
Bulgaria  
Croatia  
Czech  
Sweden  
Press »P+«, »P-«, » « or » « to select the country and  
Ǹ
Ƿ
Luxembourg Switzerland  
Netherlands Turkey  
Denmark  
England  
Finland  
France  
»OK« to confirm.  
Norway  
Poland  
Yugoslavia  
– The search begins. It may last a few minutes, depending on  
the number of television stations found.  
Portugal  
– After the search the television switches to channel position 1  
and the »Program table« menu appears.  
Select  
and confirm  
Back  
OK  
Exit  
G
Changing stored channels  
You can delete channels that have been stored more than once  
during the automatic search. You can also store channels in a diffe-  
rent preset position, change or enter the name of a channel as well  
as skip channels.  
Program table  
01 ARD  
02 ZDF  
09  
17 ----  
18 ----  
19 ----  
20 ----  
21 ----  
22 ----  
23 ----  
24 ----  
S
S
S
S
S
S
S
S
10  
03 BR  
11  
S
S
S
S
S
S
Deleting channels  
04 RTL  
12 ----  
13 ----  
14 ----  
15 ----  
16 ----  
1
In the »Program table« menu, select the station to be deleted  
05 SAT 1  
06 PRO 7  
07 BR  
with »P+«, »P-«, » « or » «.  
Ǹ
Ƿ
08 TEL5  
Ƿ
2
3
Highlight the channel with » « (yellow).  
Skip  
Ƿ
Press » « (yellow) to delete the channel.  
OK  
Select  
Exit  
Move  
Delete  
Name  
G
Note:  
To delete other stations, repeat steps 1 and 3.  
8
 
______________________________________________  
SETTINGS  
Sorting television channels  
1
In the »Program table« menu, select the channel to be moved  
Program table  
01 ARD  
02 ZDF  
with with »P+«, »P-«, » « or » «.  
Ǹ
Ƿ
09  
17 ----  
18 ----  
19 ----  
20 ----  
21 ----  
22 ----  
23 ----  
24 ----  
S
S
S
S
S
S
S
S
10  
2
3
Highlight the channel with »  
Ȅ
« (green).  
03 BR  
11  
S
S
S
S
S
S
04 RTL  
12 ----  
13 ----  
14 ----  
15 ----  
16 ----  
Select a new channel position by pressing »P+«, »P-«, » « or  
Ǹ
05 SAT 1  
06 PRO 7  
07 BR  
»
« and then press »Ȅ« to confirm.  
Ƿ
– All of the channels that follow move up one position.  
08 TEL5  
Note:  
Skip  
To sort the other television channels repeat steps 1 to 3.  
OK  
Select  
Exit  
Move  
Delete  
Name  
G
Entering the channel names  
(maximum of 5 characters)  
1
In the »Program table« menu, select the desired channel with  
»P+«, »P-«, » « or » «.  
Ǹ
Ƿ
Program table  
01 ARD  
02 ZDF  
09  
17 ----  
S
S
S
S
S
S
S
S
F
2
3
Highlight the channel with » « (blue).  
10  
18 ----  
19 ----  
20 ----  
21 ----  
22 ----  
23 ----  
24 ----  
03 BR  
11  
S
S
S
S
S
S
Select letters or numbers with »P+« or »P-«, move to the next  
04 RTL  
12 ----  
13 ----  
14 ----  
15 ----  
16 ----  
position with » « or » « and repeat.  
05 SAT 1  
06 PRO 7  
07 BR  
Ǹ
Ƿ
F
4
Store the channel name with » « (blue).  
08 TEL5  
Note:  
Skip  
Move  
To enter additional channel names, repeat steps 1 to 4.  
OK  
Select  
Exit  
G
Delete  
Name  
Skipping television channels  
You can mark television channels which should be skipped during  
selection with »P+« or »P-«. A selection with the number keys is  
also possible.  
Program table  
01 ARD S  
02 ZDF  
09  
17 ----  
S
S
S
S
S
S
S
S
1
In the »Program table« menu, select the desired channel with  
10  
18 ----  
19 ----  
20 ----  
21 ----  
22 ----  
23 ----  
24 ----  
»P+«, »P-«, » « or » «.  
Ǹ
Ƿ
03 BR  
11  
S
S
S
S
S
S
04 RTL  
12 ----  
13 ----  
14 ----  
15 ----  
16 ----  
z
2
Highlight the channel with »  
« (red).  
05 SAT 1  
06 PRO 7  
07 BR  
– An »S« appears behind the name of the television station.  
You can deselect the selected channel by pressing the red  
button again.  
08 TEL5  
Skip  
Concluding the settings  
Press »i« to finish the settings.  
Select  
Exit  
Move  
Delete  
Name  
OK  
G
1
9
 
______________________________________________  
SETTINGS  
Picture settings  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
Picture  
Brightness  
Contrast  
39  
2
Select »Picture« with »P+« or »P-« and confirm with »OK«.  
– The »Picture« menu appears.  
Colour  
Sharpness  
Hue  
Noise reduction  
Picture smart  
Sharp  
User  
3
4
Select »Default settings« with »P+« or »P-« and the setting  
»User« with » « or » «.  
Ǹ
Ƿ
Select  
Back  
Exit  
Select »Brightness«, »Contrast«, »Colour«, »Sharpness« or  
»Noise reduction« with »P+« or »P-« and press »OK« to con-  
firm.  
OK  
G
and edit  
Note:  
The setting »Hue« only applies to NTSC programmes (e.g. for  
playback of American television programmes on the video  
recorder).  
5
6
Press » « or » « to select the level, and then press »OK« to  
confirm.  
Ǹ
Ƿ
Press »i« to finish the settings.  
Audio settings  
1
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
Sound  
Volume  
0
Balance  
Sound type  
Effect  
2
Select »Sound« with »P+« or »P-« and confirm with »OK«.  
– The »Sound« menu appears.  
Stereo  
Normal  
On  
AVL  
Headphones  
Equalizer  
Note:  
Further operation is explained in the following sections.  
Select  
Back  
Exit  
and edit  
Volume  
1
Select »Volume« with »P+« or »P-« and adjust the setting with  
« or » «.  
»
Ǹ
Ƿ
Balance  
1
Select »Balance« with »P+« or »P-« and adjust the setting with  
« or » «.  
»
Ǹ
Ƿ
10  
 
______________________________________________  
SETTINGS  
Stereo / two channel, mono  
If the device receives two channel programmes, e.g. a film with the  
original sound on sound channel B (display: »Dual B «) and the  
dubbed version on sound channel A (display: »Dual A«), you can  
select the sound channel you desire.  
If the device receives stereo or Nicam programmes, it switches  
automatically to stereo sound (display: »Stereo«).  
You can switch the sound to »Mono« if the stereo reception  
quality is poor.  
1
Select »Sound type« with »P+« or »P-« and adjust the setting  
with » « or » «.  
Ǹ
Ƿ
Stereo width  
Widens the audio output for stereo programmes and improves the  
sound with mono reception.  
1
2
Select »Sound type« with »P+« or »P-«.  
Press » « or » « to select the setting.  
Ǹ
Ƿ
Automatic volume  
The television channels broadcast at different volumes. The automa-  
tic volume limiting (AVL) function means the volume is kept the same  
when you switch between channels.  
1
Select »AVL« with »P+« or »P-« and then select »On« with  
« or » «.  
»
Ǹ
Ƿ
Equaliser  
The equaliser offers you four preset sound settings (Music, Sport,  
Cinema and Dialogue) and one which you can create yourself  
(User).  
1
2
3
Select »Equalizer« with »P+« or »P-« and confirm with  
»OK«.  
– The »Equalizer« menu appears.  
Equalizer  
User  
ĵ
Ł
12 dB  
Select the audio setting »User« with »P+« or »P-« and confirm  
with »OK«.  
– The frequency band »120 Hz« is activated.  
0 dB  
-12 dB  
Set the desired value with »P+« or »P-« and select the next  
<120Hz 500Hz 1.5kHz 5kHz 10kHz>  
frequency band with » « or » «.  
Ǹ
Ƿ
Select  
Back  
Exit  
OK  
G
and edit  
F
4
5
Press » « (blue) to save the setting.  
F
Press » « (blue) to finish the settings.  
Concluding the settings  
Press »i« to finish the settings.  
1
11  
 
___________________  
TELEVISION OPERATION  
Basic functions  
Switching on and off  
1
Switch on the television by pressing the »IO« button on the tele-  
vision set.  
– The device switches to standby mode.  
Switch the television on with »1…0« or »P+« or »P-«.  
PIP  
2
3
Press the »Ǽ« button to switch the television to standby mode.  
Press »1…0« or »P+« or »P-« to switch on the device from  
standby mode.  
z
Completely switch the television off by pressing »IO« on the  
television set.  
– This saves electricity.  
Selecting channels  
TXT  
AV  
POS  
d
1
Use »1…0« to select channels directly.  
SCAN  
PAP  
SIZE  
2
Press »P+« or »P-« to move up and down channels.  
VCR  
DVD  
SAT  
Selecting AV channels  
1
Call up the »Source table« menu with »AV«.  
2
Select the desired AV channel position with »P+« or »P-« and  
press »OK« to confirm.  
Tele Pilot 160 C  
3
Switch back to the television channel with »1…0«.  
Adjusting the volume  
1
Adjust the volume with » « or » «.  
Ǹ
Ƿ
Muting  
1
Use » « to switch the sound off (mute) and to switch it on  
again.  
p
Displaying time  
1
You can display the time by pressing the »  
channels with teletext).  
Ȅ« button (only for  
Displaying information  
1
Press »-/--« to display the information.  
– The display disappears automatically after a short while.  
Freeze-frame  
If you wish to view a particular scene for longer, you can freeze the  
frame of the current programme.  
Ƿ
1
2
Press » « (yellow).  
Ƿ
To quit this function, press » « again.  
12  
 
___________________  
TELEVISION OPERATION  
Picture settings  
You can select four different picture settings.  
1
Select the desired picture setting from »User«, »Natural«,  
z
»Rich« or »Soft« with »  
«.  
You can alter the »User« picture setting, see the ”Picture  
settings” chapter on page 10.  
Audio settings  
You can select six different audio settings.  
1
Select the desired sound setting from »User«, »Music«, »Sport«,  
»Cinema« or »Speech« with » «.  
F
You can alter the »User« sound settings, see the ”Equaliser”  
chapter on page 11.  
Zap function  
This function allows you to save the television channel which you  
are currently watching and switch to other channels (zapping).  
1
Select the channel you want to save in the zap memory with  
»1…0« or »P+« »P-«, (e.g. channel 1, BBC 1) and save by  
pressing »Z«.  
– The display »z 1« appears in the screen.  
2
3
Change channels with »1…0« or »P+« »P-«.  
You can now use »Z« to switch between the saved channel (in  
the example, BBC1) and the channel you were watching befo-  
re.  
4
Press »i« to quit the zap function.  
– The display disappears.  
13  
 
___________________  
TELEVISION OPERATION  
Zoom function  
This function enables you to enlarge the television or PC picture.  
1
Press »i« to open the »MAIN MENU« menu.  
– The »MAIN MENU« menu appears.  
2
Select »Picture« with »P+« or »P-« and press »OK« to  
confirm.  
– The »Picture« menu appears.  
Picture  
Noise reduction  
Picture smart  
H Position  
V Position  
Phase  
Sharpest  
Rich  
3
Select »Brightness« with »P+« or »P-« and press »P+« again.  
– »Zoom« is selected.  
Auto position  
Zoom  
4
5
6
Press »OK« to activate the zoom function.  
Select  
Back  
Exit  
Press »P+« or »P-« to change the size of the picture.  
OK  
G
and edit  
To change the picture section press »OK« and then » «, » «,  
Ǹ Ƿ  
»P+« or »P-« to select the section.  
7
Press »i« to quit the zoom function.  
– The display disappears.  
14  
 
___________________  
TELEVISION OPERATION  
Changing the picture format  
The television automatically switches to the 16:9 format if this  
format is detected via the Euro-AV socket.  
1
Select the picture format with »  
format, for example »16:9«, appears on the screen.  
You can choose between the following picture formats:  
«. The selected picture  
E
»4:3« format  
The picture is shown in 4:3 format.  
»Auto« format  
The picture format is automatically switched to »16:9« for 16:9  
programmes.  
For programmes in 4:3 format, the picture automatically fills the  
screen.  
»16:9« and »14:9« formats  
During programmes in 4:3 format, the picture is stretched horizon-  
tally if »16:9« or »14:9« is selected.  
The picture geometry is stretched horizontally.  
With actual 16:9 signal sources (from a set-top box on the Euro-AV  
socket) the picture fills the screen completely and with the correct  
geometry.  
»Letterbox« format  
The letterbox setting is especially suitable for programmes in 16:9  
format.  
The black borders which are usually at the top and bottom of the  
screen are eliminated, 4:3 pictures fill the screen.  
The transmitted pictures are enlarged, but are slightly cropped at  
the top and bottom. The picture geometry remains unchanged.  
The »Auto Letterbox« message appears for PAL Plus television  
programmes.  
»Panorama« format  
This setting is suited to films with a large width/height ratio.  
During programmes in 4:3 format the picture is stretched horizon-  
tally if the »Panorama« function is selected. The picture geometry is  
stretched horizontally.  
»Subtitles« format  
If you cannot read the subtitles which appear on the bottom of the  
screen (especially during programmes with 4:3 format and if the  
»Subtitles« format is selected), then select »Subtitles«.  
15  
 
___________________  
TELEVISION OPERATION  
PIP mode  
PIP (picture in picture) allows you to watch an inset picture from a  
second picture source in addition to the current channel.  
Other television stations, DVD players, video recorders or satellite  
receivers can be used as video sources. They must be connected to  
the input sockets on the back of the device.  
Displaying the inset picture  
1
To display the inset picture, press »PIP« once.  
Double window  
1
To activate the double window function (split screen), press  
»PIP« twice.  
– The last selected main and inset pictures are shown next to  
each other.  
Selecting the channels for the inset picture and  
the right side of the screen (double window)  
1
Press »P+« or »P-« to move up and down channel positions  
one at a time.  
Selecting the channels for the main picture and  
the left side of the screen (double window)  
1
Press »1…0« to select channels directly, or select the video  
source (DVD player, video recorder, SAT receiver); then call the  
»Source table« menu by pressing »AV«, select the desired AV  
channel position with »P+« or »P-« and press »OK« to  
confirm.  
Swapping the main and inset pictures  
1
Press »Z« to swap the main and inset pictures.  
Changing the position of the inset picture  
1
Press »POS« to move the inset picture.  
Changing the size of the inset picture  
1
Press »SIZE« to change the size of the inset picture.  
Ending the PIP function  
1
To hide the inset picture, press »PIP« twice.  
Quitting the double window  
1
To quit the double window, press »PIP«.  
16  
 
_______________________________  
TELETEXT MODE  
TOP text or FLOF text mode  
1
Press »TXT« to switch to teletext mode.  
2
You can directly select teletext pages with »1...0«.  
PIP  
Note:  
At the bottom of the screen, you will see an information line  
consisting of a red, green and, depending on the station,  
yellow and blue text field. Your remote control has buttons with  
the corresponding colours.  
z
z
3
4
5
6
7
Press »  
« (red) to scroll back a page.  
Press »  
Ȅ
« (green) to scroll to the next page.  
Ƿ
Press » « (yellow) to select chapters.  
TXT  
AV  
POS  
d
F
Press » « (blue) to select topics.  
SCAN  
PAP  
SIZE  
To switch off teletext, press »TXT« twice.  
VCR  
DVD  
SAT  
Normal text mode  
1
2
3
4
5
Press »TXT« to switch to teletext mode.  
You can directly select teletext pages with »1...0«.  
Press »P-« to scroll back a page.  
Tele Pilot 160 C  
Press »P+« to scroll to the next page.  
To switch off teletext, press »TXT« twice.  
Additional functions  
Skipping the waiting time  
While a page is being searched for, you can switch to the television  
channel.  
1
2
Enter the teletext page number using »1…0« and then press  
»POS«.  
– As soon as the page is found, the page number is displayed.  
Press »POS« to switch to the teletext page.  
Increasing character size  
If you have difficulty reading the text on the screen, you can double  
the character size.  
1
To enlarge the character size of a teletext page, press »–/«  
repeatedly.  
17  
 
_______________________________  
TELETEXT MODE  
Page stop  
A multiple page may contain several sub-pages, which are automa-  
tically scrolled by the transmitting station.  
1
2
Stop the sub-pages with »  
«.  
E
PIP  
Press »  
« to quit the function.  
E
Calling up a sub-page directly  
If the selected teletext page contains further pages, the number  
of the current sub-page as well as the total number of pages is  
displayed.  
z
1
2
3
Call up the sub-pages with »SIZE«.  
Press »P-« to scroll back a page.  
Press »P+« to scroll to the next page.  
TXT  
AV  
POS  
d
SCAN  
PAP  
SIZE  
Reveal answer  
VCR  
DVD  
SAT  
Certain teletext pages contain ”hidden answers” or information  
which can be called up.  
1
2
Display information with »SCAN«.  
Conceal information with »SCAN«.  
Tele Pilot 160 C  
Split screen (double window)  
With this function you can see the television channel on the left and  
the teletext page on the right.  
1
2
To activate the window function, press »PAP«.  
– The television channel and the teletext page appear next to  
each other on the screen.  
To deactivate the double window function, press »PAP«.  
18  
 
______________  
CONVENIENCE FUNCTIONS  
Convenience functions with the »Features« menu  
1
To open the »MAIN MENU« press »i«.  
2
Select »Features« with »P+« or »P-« and confirm with »OK«.  
Note:  
Further operation is explained in the following sections.  
Child lock  
Features  
Parental lock  
VCR mode  
On  
If the child lock is activated, the buttons on the television are not  
operable.  
Menu language  
AV2 output  
Tv  
Tv  
0
1
2
Select »Parental lock« with »P+« or »P-«.  
AV3 output  
Sleep timer  
Press » « or » « to activate or deactivate the child lock  
Ǹ
Ƿ
(On or Off).  
Press »i« to conclude the setting.  
Select  
Back  
and edit  
Exit  
3
Changing the menu language  
1
Select »Menu language« with »P+« or »P-« and confirm with  
»OK«.  
– The »Menu language« menu appears.  
Features  
Parental lock  
VCR mode  
On  
Off  
Menu language  
AV2 output  
Tv  
Tv  
0
2
3
Select the language with »P+«, »P-«, » « or » « and press  
Ǹ
Ƿ
AV3 output  
»OK« to confirm.  
Sleep timer  
Press »i« to finish the setting.  
Select  
Back  
Exit  
OK  
G
and open  
Entering the switch-off time for the sleep timer  
You can enter a switch-off time. After this time has elapsed, the tele-  
vision switches to standby mode.  
1
2
3
Select »Sleep timer« with »P+« or »P-« and press »OK« to  
confirm.  
Features  
Parental lock  
VCR mode  
On  
Off  
To enter the switch-off time (from 15 to 120 minutes), press  
Menu language  
AV2 output  
Tv  
Tv  
»
« or » «.  
Ǹ
Ƿ
AV3 output  
Sleep timer  
0
Press »i« to conclude the setting.  
Select  
Back  
Exit  
and edit  
19  
 
_______________  
USING EXTERNAL DEVICES  
Decoder or satellite receiver  
In order for the television to receive encoded programs from a  
privately operated station, a decoder is needed.  
Connecting a decoder or satellite receiver  
AV  
AV  
3
2
VIDEO  
L
R
VIDEO  
L
R
PC-DVI  
AUDIO IN  
ANT IN  
S-VHS  
PC-IN  
DVI-D  
AV-4  
AV OUT  
AC IN  
Decoder  
PAY-TV  
1
Connect the »AV1« socket on the television set and the appropriate  
socket on the decoder using a EURO-AV cable.  
Notes:  
A satellite receiver can also be connected to this socket.  
If you want to use both a satellite receiver and a decoder, the  
decoder must be connected to the satellite receiver.  
Using a decoder  
1
Switch on the television and the decoder.  
2
Press »AV«, select the channel »AV1« with »P+« or »P-« and  
press »OK« to confirm.  
Video recorder, DVD player or SET-TOP box  
Connecting the video recorder, DVD player or  
SET-TOP box  
AV  
AV  
3
1
VIDEO  
L
R
VIDEO  
L
R
PC-DVI  
AUDIO IN  
ANT IN  
S-VHS  
PC-IN  
DVI-D  
AV-4  
AV OUT  
AC IN  
AUDIO OUT  
DIGITAL AUDIO OUT  
VIDEO OUT  
L
EURO  
AV  
TV  
110-240  
V
W
~
/0Hz 20  
R
S
VIDEO OUT  
1
Connect the »AV2« or »AV3« sockets on the television and the  
corresponding sockets of the video recorder, DVD player or the  
set-top box with a Euro-AV (Scart) cable.  
or  
20  
 
_______________  
USING EXTERNAL DEVICES  
1
Connect the »PC IN« socket on the television to the corre-  
sponding cinch sockets on the DVD players or the set-top box  
using the adapter cable supplied (VGA – YUV) (video signal).  
2
Connect the »PC-DVI AUDIO IN« socket on the television to  
the corresponding sockets on the DVD player or set-top box a  
cinch cable (audio signal).  
Using a video recorder, DVD player or SET-TOP box  
1
Switch on the video recorder, DVD player or SET-TOP box and  
select the function you wish to use.  
2
Press »AV«, select the channel »AV2«, » AV3« or »YPBPR«  
(YUV) with »P+« or »P-« and press »OK« to confirm.  
You can hear and see the video and audio information from  
the video recorder or the SET-TOP box on the television set.  
Connecting the SVHS video recorder  
If you own a SVHS video recorder, you can connect it using a  
SVHS cable to the »S-VHS« socket.  
Using a SVHS video recorder  
1
Switch on the video recorder and select the function you wish  
to use.  
2
Press »AV«, select the channel »SVHS« with »P+« or »P-« and  
press »OK« to confirm.  
You will see the picture and hear the sound of the video  
recorder on the television.  
Switching VCR mode on/off  
The AV time constant is adapted to video recorder operation.  
1
2
3
Press »AV«, select the channel with the connected VCR with  
»P+« or »P-« and press »OK« to confirm.  
Features  
Parental lock  
VCR mode  
On  
Call up the »MAIN MENU« menu with »i«.  
– The »MAIN MENU« menu appears.  
Off  
Menu language  
AV2 output  
Tv  
Tv  
0
Select »Features« with »P+« or »P-« and press »OK« to con-  
firm.  
AV3 output  
Sleep timer  
4
5
Select »VCR mode« with »P+« or »P-« and select »On« with  
Select  
Back  
Exit  
»
Ǹ
« or » «.  
Ƿ
and edit  
Press »i« to conclude the setting.  
21  
 
_______________  
USING EXTERNAL DEVICES  
Selecting the signal for the Euro-AV (Scart) output  
With this setting you select whether the television channel or the  
audio/video will be transmitted via the Euro-AV socket AV3 or AV2.  
This enables you to transmit recordings from one external device  
(e.g. a DVD player) to another using the television. Connect the  
playback device to Euro-AV socket AV2 and the recording device to  
Euro-AV socket AV3 and in the »Special functions« menu, select the  
required setting:  
AV2 output:  
»TV« – the television channel that you are viewing or  
»AV3« – the audio/video signal from Euro-AV socket AV3);  
AV3 output:  
»TV« – the television channel that you are viewing or  
»AV2« – the audio/video signal from Euro-AV socket AV2);  
Features  
1
2
Call up the »MAIN MENU« menu with »i«.  
Parental lock  
VCR mode  
On  
Off  
Menu language  
AV2 output  
Select »Features« with »P+« or »P-« and press »OK« to con-  
firm.  
TV  
AV3 output  
Tv  
0
Sleep timer  
3
4
5
Select »AV2 output« or »AV3 output« with »P+« or »P-«.  
Select  
Back  
Exit  
Select the desired option with » « or » «.  
Ǹ
Ƿ
and edit  
Press »i« to conclude the setting.  
Headphones  
Connecting headphones  
1
Insert the headphone jack (3.5 mm ø jack plug) in the headpho-  
ne socket on the bottom.  
R
PC-DVI  
AUDIO IN  
S-VHS  
PC-IN  
DVI-D  
AC IN  
Selecting the sound settings for the headphones  
1
2
3
Press »i« to open the »MAIN MENU«.  
Select »Sound« with »P+« or »P-« and confirm with »OK«.  
Select »Headphones« with »P+« or »P-« and confirm with  
»OK«.  
Headphones  
Volume  
Balance  
Sound type  
Bass  
30  
4
5
Select »Volume«, »Balance«, »Bass«, »Treble« or »Soundtype«  
Stereo  
with »P+« or »P-« and set with » « or » «.  
Ǹ
Ƿ
Treble  
Press »i« to finish the setting.  
Select  
Back  
Exit  
OK  
G
and edit  
22  
 
_______________  
USING EXTERNAL DEVICES  
Camcorder  
Connecting the camcorder  
AV  
AV  
AV  
3
2
1
1
Connect the yellow socket »AV4 Video« on the television and  
the corresponding socket on the camcorder (VHS, Video 8) with  
a cinch cable (picture signal)  
VIDEO  
L
R
VIDEO  
L
R
ANT IN  
AV  
AV OUT  
or  
connect the »S-VHS« socket (picture signal) on the television  
and the corresponding socket on the camcorder (S-VHS, Hi 8)  
with a cinch cable.  
2
Connect the white and red sockets »AV4 LR« on the television  
and the corresponding sockets on the camcorder with a cinch  
cable (audio signal).  
Note:  
If a mono camera is connected, connect the white socket  
»AV4 L« on the television and the corresponding socket on the  
camera. Select »Mono« in the »Sound« menu for mono operati-  
on.  
Operating with a camcorder  
1
Switch on the camcorder, insert a cassette and start playback.  
2
Press »AV«, select the »AV4« or SVHS« channel with »P+« or  
»P-« and press »OK« to confirm.  
You will see the picture and hear the sound of the camcorder  
on the television.  
HiFi system  
Connecting the HiFi system  
AV  
AV  
AV  
3
2
1
VIDEO  
L
R
VIEO  
PC-DVI  
AUDIO IN  
ANT IN  
S-VHS  
PC-IN  
DVI-D  
AV-4  
AV UT  
AC IN  
WT–A  
1
Connect the white and red sockets »AV OUT L R « on the tele-  
vision and the corresponding sockets on the HiFi with a cinch  
cable.  
23  
 
__________________________  
PC MONITOR MODE  
Connecting a PC  
AV  
AV  
AV  
3
2
1
VIDEO  
L
AV -  
R
VIDEO  
L
R
PC-VI  
AUDIN  
ANT IN  
S-VHS  
DVI-D  
4
AV OUT  
AC IN  
1
2
Connect the socket »PC IN« or »DVI-D« on the television to  
the corresponding socket on the PC using a VGA cable.  
Connect the socket »PC-DVI AUDIO IN« on the television to  
the corresponding socket on the PC using a cinch cable (audio  
signal).  
Selecting the channel position for the PC  
1
Press »AV«, select the »PC« or »DVI« channel with »P+« or  
»P-« and press »OK« to confirm.  
Picture  
Brightness  
Contrast  
39  
Colour  
Settings for the PC  
Sharpness  
Hue  
1
Press »i« to open the »MAIN MENU« menu.  
– The »MAIN MENU« menu appears.  
Noise reduction  
Picture smart  
Sharp  
User  
2
Select »Picture« with »P+« or »P-« and press »OK« to  
confirm.  
Select  
Back  
Exit  
OK  
G
and edit  
– The »Picture« menu appears.  
3
4
Select »Brightness« with »P+« or »P-« and press »P+« again.  
– The second page of the picture menu appears.  
Picture  
Noise reduction  
Picture smart  
H Position  
V Position  
Phase  
Sharp  
Rich  
Press »P+« or »P-« to select the function or setting.  
– Options:  
»H Position« – adjust the horizontal picture position  
»V Position« – adjust the vertical picture position  
»Phase« – removes horizontal flicker, blurring and horizontal  
lines  
Auto position  
Zoom  
Select  
Back  
Exit  
OK  
G
and open  
»Auto position« – for automatic adjustment to the PC  
5
6
Press »OK« to activate the function and » « or » « to adjust.  
Ǹ
Ƿ
Press »i« to finish the setting.  
24  
 
______________________________  
SPECIAL SETTINGS  
Setting television channels  
This setting is only necessary if a new channel comes on air and you  
do not want to change the order of your channels. The television  
channel can be set directly or using the search.  
Setting channels using the search  
Setup  
1
2
3
4
5
Press »i« to open the »MAIN MENU«.  
ATS  
– The »MAIN MENU« appears.  
Installation  
Program table  
Select »Setup« with »P+« or »P-« and confirm with »OK«.  
– The »Setup« menu appears.  
Select  
Back  
Exit  
OK  
G
Select »Installation« with »P+« or »P-« and confirm with  
»OK«.  
and open  
Select »Program no« with »P+« or »P-« and set the preset  
Installation  
channel with » « or » «.  
Ǹ
Ƿ
Program no  
System  
Channel  
Band  
1
B/G  
6
Select »Search« with »P+« or »P-« and start the search with  
« or » «.  
»
Ǹ
Ƿ
C
Search  
– If a strong station signal is received, the search is interrupted  
and the picture appears. Repeat the search until the channel  
you want appears on the screen.  
Fine tuning  
Store  
Select  
Back  
Exit  
and edit  
Note:  
The current system is automatically displayed in the »System«  
line. Select »System« with »P+« or »P-« if the colour or sound  
are incorrect. Select the setting required with » « or » «.  
Installation  
Ǹ
Ƿ
Program no  
System  
Channel  
Band  
1
6
7
Select »Store« with »P+« or »P-« and confirm with »OK«.  
– The »Stored« message appears.  
B/G  
6
C
Note:  
Search  
Fine tuning  
Store  
To set other television stations, repeat steps 3 to 6.  
Press »i« to finish the setting.  
Select  
Back  
Exit  
OK  
G
and edit  
25  
 
______________________________  
SPECIAL SETTINGS  
Fine tuning television channels  
The television automatically tunes itself to the best possible recepti-  
on. You may need to carry out manual fine tuning in areas where  
there is poor reception.  
1
2
3
4
5
6
Press »i« to open the »MAIN MENU«.  
– The »MAIN MENU« appears.  
Installation  
Program no  
System  
Channel  
Band  
1
Select »Setup« with »P+« or »P-« and confirm with »OK«.  
– The »Setup« menu appears.  
B/G  
6
C
Search  
Select »Installation« with »P+« or »P-« and confirm with  
»OK«.  
Fine tuning  
Store  
Select »Fine tuning« with »P+« or »P-« and set it with »  
«
Ǹ
Select  
Back  
Exit  
and edit  
or » «.  
Ƿ
Select »Store« with »P+« or »P-« and confirm with »OK«.  
– The »Stored« message appears.  
Press »i« to finish the setting.  
Setting the television channels by entering the  
channel numbers  
1
2
3
4
Press »i« to open the »MAIN MENU«.  
Setup  
– The »MAIN MENU« appears.  
ATS  
Select »Setup« with »P+« or »P-« and confirm with »OK«.  
– The »Setup« menu appears.  
Installation  
Program table  
Select »Installation« with »P+« or »P-« and confirm with  
»OK«.  
Select  
Back  
Exit  
OK  
G
and open  
Select »Program no« with »P+« or »P-« and set the preset  
channel with » « or » «.  
Ǹ
Ƿ
Installation  
Program no  
System  
Channel  
Band  
1
5
6
Select »Channel« with »P+« or »P-«.  
B/G  
6
Press » « or » « to switch up and down channels or use  
Ǹ
Ƿ
C
»1…0« to enter the channel number directly.  
Search  
Fine tuning  
Store  
7
8
Select »Band« with »P+« or »P-«.  
Press » « or » « to choose between »S« (special channel)  
Ǹ
Ƿ
Select  
Back  
Exit  
and »C« (channel).  
and edit  
Note:  
Installation  
The current system is automatically displayed in the »System«  
line. Select »System« with »P+« or »P-« if the colour or sound  
are incorrect. Select the setting required with » « or » «.  
Program no  
System  
Channel  
Band  
1
B/G  
6
Ǹ
Ƿ
C
9
Select »Store« with »P+« or »P-« and confirm with »OK«.  
– The »Stored« message appears.  
Search  
Fine tuning  
Store  
Note:  
Select  
Back  
Exit  
To set the other television stations, repeat steps 3 to 9.  
OK  
G
and edit  
10 Press »i« to finish the setting.  
 
26  
______________________________  
SPECIAL SETTINGS  
Re-tuning all television channels  
You can re-tune all the television stations, for example if you move  
to another town.  
Setup  
ATS  
1
2
Press »i« to open the »MAIN MENU«.  
Installation  
Program table  
Select »Setup« with »P+« or »P-« and confirm with »OK«.  
– The »Setup« menu appears.  
Select  
Back  
Exit  
OK  
G
and open  
3
Select »ATS« with »P+« or »P-« and confirm with »OK«.  
– The »ATS« menu appears.  
4
5
Press » « or » « to select the country.  
Ǹ
Ƿ
ATS  
United Kingdom  
Country  
Select »Autoprogram« with »P+« or »P-« and confirm with  
»OK«.  
Autoprogram  
– A warning message appears.  
Select  
Back  
Exit  
and edit  
6
Press »Ȅ« (green) to start the search.  
– The search begins. It may last a few minutes, depending on  
the number of television stations found.  
– The automatic search may last a few minutes, depending on  
the number of television channels received.  
Note:  
You can interrupt the search by pressing »OK«.  
27  
 
_____________________________________  
INFORMATION  
Technical data  
Operating voltage: 230 V, 50/60 Hz  
Power consumption: in operation 110 W  
in standby approx. 4 W (Vision 26)  
in operation 129 W  
in standby approx. 4 W (Vision 32)  
Sound output:  
2 x 10 watts music (2 x 7 sine wave)  
(Vision 26)  
2 x 14 watts music (2 x 10 sine wave)  
(Vision 32)  
Reception range:  
Preset channels:  
Screen size:  
C01 … C80, special channels S01 … S41  
99 and 7 AV (Vision 26, Vision 32)  
68 cm/26” (Vision 26)  
82 cm/32” (Vision 32)  
Viewing angle:  
Contrast ratio:  
170° hor./170° vert.  
600:1 (Vision 26)  
700:1 (Vision 32)  
2
Brightness:  
450cd/m (Vision 32)  
2
500cd/m (Vision 26)  
Max. resolution:  
WXGA 1280 x 768 (Vision 26)  
WXGA 1366 x 768 (Vision 32)  
Service information for dealers  
The television set may only be operated with the mains adapter sup-  
plied.  
The product complies with the following EU directives:  
73/23/EEC directive for electrical equipment to be used within  
defined voltage ranges. 89/336/EEC directive on electromagnetic  
compatibility.  
The device complies with the following standards: EN 60065,  
EN 55013, EN 55020  
Subject to alteration and correction!  
28  
 
_____________________________________  
INFORMATION  
Troubleshooting  
If the remedies given below do not work, please consult an authori-  
sed GRUNDIG dealer. Please bear in mind that malfunctions can  
also be caused by external devices such as video recorders or satel-  
lite receivers.  
Fault  
Possible cause  
Remedy  
Screen lit (snow), but no  
station  
Antenna cable  
Is the antenna cable  
connected?  
No television station pro-  
grammed  
Start the station search  
Poor picture contrast  
Picture settings incorrectly Adjust the brightness,  
set  
contrast or colour setting  
Problem at station  
Test with another channel  
Interference to picture  
and/or sound  
Interference from other  
devices  
Change the position of the  
device  
Ghosts, reflection  
Channel setting  
Automatic or manual chan-  
nel setting/fine tuning  
Antenna  
Have antenna cable or  
system checked  
No colour  
Colour intensity at minimum Turn up the colour  
TV standard setting (if Select the correct colour  
setting option is available) standard  
Problem at station  
Test with another channel  
Picture but no sound  
Volume set to minimum  
Turn up or switch on the  
volume  
Problem at station  
Test with another channel  
Teletext missing or faulty  
Television station (has no  
Test another channel for  
teletext) or antenna system fine tuning and ghosts  
Station signal too weak  
No optical connection  
Check the antenna system  
Remote control does not  
work  
Point the remote control at  
the television set  
Remote control batteries  
Check the batteries, change  
if necessary  
Operating condition unde- Switch off the television  
fined  
with the main power button  
for approximately  
2 minutes  
The picture is dark after  
switching on  
Parental lock has been  
activated  
Switch off the parental lock  
29  
 
_____________________________________  
INFORMATION  
Additional Information for units sold in the UK.  
Units sold in the UK are suitable for operation from a 240V ac, 50Hz mains  
supply.  
The range of multi-system receivers is built to work in most European coun-  
tries. However, the mains plug and socket system for the UK differs from  
many European countries.  
This appliance has been supplied with a fitted, non-removable, approved  
converter plug for use in the UK. This converter plug is fitted with a 5A rated  
fuse.  
In case this appliance is supplied with a moulded 2-pin Euro plug only,  
which is unsuitable for UK operation, this must be cut off and immediately  
disposed of. An approved 13A, 3-pin UK plug should then be fitted by a  
qualified electrician.  
Note:  
The severed Euro plug must be destroyed to avoid a possible shock  
hazard should it be inserted into a socket elsewhere.  
If a non-rewireable 3-pin plug or a rewireable 13A (BS1363) 3-pin plug is  
used, it must be fitted with a 5A ASTA or BSI approved BS1362 fuse. If any  
other type of plug is used it must be protected by a 5A fuse either in the  
plug, or at the distribution board. If this type of plug becomes defective,  
ensure that the fuse is removed before disposal, to eliminate potential shock  
hazard.  
If it is necessary to change the fuse in the non-rewireable plug, the correct  
type and rating (5A ASTA or BSI approved BS1362) must be used and the  
fuse cover must be refitted. If the fuse cover is lost or damaged, the lead and  
plug must not be used until a replacement is obtained. Replacement fuse  
covers should be obtained from your dealer.  
Important:  
The wires in the mains lead are colour coded in accordance with the follo-  
wing code:  
BLUE – NEUTRAL  
BROWN – LIVE  
As the colours of the wires in the mains lead of your appliance may not cor-  
respond with the coloured marking identifying terminals in your plug, pro-  
ceed as follows:  
Connect the BLUE coloured wire to plug terminal marked with the letter “N”  
or coloured black.  
Connect the BROWN coloured wire to the plug terminal marked with the let-  
ter “L” or coloured red.  
In no circumstance must any of the wires be connected to the terminal mar-  
ked with the letter “E”, earth symbol “z”, coloured green, or green & yel-  
low.  
30  
 

Graco Stroller 1763285 User Manual
Grizzly Planer Model G0550 User Manual
Haier Flat Panel Television HTN20R16 User Manual
Haier Washer HWM80 828A User Manual
HannsG Computer Monitor HC17 Series User Manual
Harbor Freight Tools Nail Gun 97525 User Manual
HP Hewlett Packard Network Card 3C590 TPO User Manual
HP Hewlett Packard Server 585G5 User Manual
Huffy Fitness Equipment M611804 User Manual
Hunter Fan Fan 90436 User Manual